Hi everibody
I need to connect from windows (to edit metamodeler) one file PPRJ on Linux. I have executed run_protege_server.sh on Linux.
In windows Protege client:
Open from server:
host machine name: 10.2.4.19 ( ip server linux)
User name: Admin
Password: XXXX
Message error:
Possibles causes of these error are firewall or network... check port and hostname are correct.
........
In which port run Protege to hability in firewall???
Thanks
Victor H
I need connect from Windows to server protege on linux
- jonathan.carter
- Posts: 1087
- Joined: 04 Feb 2009, 15:44
Hi Victor,
Do you have a firewall between your Protege server and your Protege client?
If, so there are some settings in the run_protege_server.bat that you can enable to specify the selected port for both the Protege Server and the Java RMI registry (used by the client to connect to the server).
This post should help as it explores the firewall configuration and has links to other posts the cover this issue from all angles.
viewtopic.php?f=6&t=952&p=6914&hilit=Firewall#p6914
Jonathan
Do you have a firewall between your Protege server and your Protege client?
If, so there are some settings in the run_protege_server.bat that you can enable to specify the selected port for both the Protege Server and the Java RMI registry (used by the client to connect to the server).
This post should help as it explores the firewall configuration and has links to other posts the cover this issue from all angles.
viewtopic.php?f=6&t=952&p=6914&hilit=Firewall#p6914
Jonathan
Essential Project Team