Hello,
I have downloaded the sample ACME repository meta-model. Now, I am attempting to publish the reports from Protege. But I am not able to view the reports because the viewwe is not recognizing the URL "http://localhost:8080/essential_viewer/reportService".
Your help is appreciated fixing this issue!
The following information may help us in narrowing the problem:
1. The Essential Viewer Home Page URL is working fine "http://localhost:8080/essential_viewer/"
2. From Protege, the report published successfully. The message in the box displayed as "Success. Repository snapshot generated and sent". The published URL is "http://localhost:8080/essential_viewer/reportService"
3. The timestamp on the webapps/essential_viewer/reportXML shows the same timestamp as published report.
4. The URL "http://localhost:8080/essential_viewer/reportService" changing to "http://localhost:8080/essential_viewer/ ... badurl.xsl"
The content on the page shows as: "Essential Viewer Error Report
Unrecognised URL requested
You have requested a URL that could not be found in Essential Viewer. Please update any bookmarks that might have brought you here and follow this link to the Essential Viewer Homepage"
Thanks
Ramesh
Essential Viewer not finding published reports
- neil.walsh
- Posts: 449
- Joined: 16 Feb 2009, 13:45
- Contact:
Hi Ramesh,
Two quick points. Although we publish to the "report service" at http://localhost:8080/essential_viewer/reportService the correct url for the viewer is simply http://localhost:8080/essential_viewer. From there you access the different views available via the dedicated homepage.
Unfortunately, the ACME demo repository you have downloaded is only compatible with v1.x of Essential and not with the latest 3.x viewer. We're preparing an upgrade script to support migration from previous versions to 3.x. This will be available soon. We're also preparing an updated demo which we also hope to share very soon.
If you want to explore 3.x Viewer right now, the best approach is to manually add some content to a 3.x repository and publish as normal.
Cheers
Neil
Two quick points. Although we publish to the "report service" at http://localhost:8080/essential_viewer/reportService the correct url for the viewer is simply http://localhost:8080/essential_viewer. From there you access the different views available via the dedicated homepage.
Unfortunately, the ACME demo repository you have downloaded is only compatible with v1.x of Essential and not with the latest 3.x viewer. We're preparing an upgrade script to support migration from previous versions to 3.x. This will be available soon. We're also preparing an updated demo which we also hope to share very soon.
If you want to explore 3.x Viewer right now, the best approach is to manually add some content to a 3.x repository and publish as normal.
Cheers
Neil
Hi Neil,
Thanks for the help.
I re-installed the Viewer to have the fresh reportXML file.
Now, I can see all views but except the Support Views. Under the Support Views section, I am not able to see any view icons. Did I miss any thing?
Thanks
Ramesh
Thanks for the help.
I re-installed the Viewer to have the fresh reportXML file.
Now, I can see all views but except the Support Views. Under the Support Views section, I am not able to see any view icons. Did I miss any thing?
Thanks
Ramesh
- neil.walsh
- Posts: 449
- Joined: 16 Feb 2009, 13:45
- Contact:
Hi,
There are no views currently in the Support section. We've put this in place for future use. It sounds like you've restored everything back. It's also worth mentioning that you can restore to the default state by publishing from a v3 repository (even an empty one).
Cheers
Neil
There are no views currently in the Support section. We've put this in place for future use. It sounds like you've restored everything back. It's also worth mentioning that you can restore to the default state by publishing from a v3 repository (even an empty one).
Cheers
Neil
Thanks Neil
Now, I am planning to go for multi-user installation. But I ran into problem. As per the document, I am not finding the pre-configured instances - 'Essential AM Annotations' and 'Essential AM Repository' in the server meta-model. Am I missing something here?
Thanks
Ramesh
Now, I am planning to go for multi-user installation. But I ran into problem. As per the document, I am not finding the pre-configured instances - 'Essential AM Annotations' and 'Essential AM Repository' in the server meta-model. Am I missing something here?
Thanks
Ramesh
- neil.walsh
- Posts: 449
- Joined: 16 Feb 2009, 13:45
- Contact:
Hi Ramesh,
A quick thought...
Did you install the Server Component when you did the Essential Install?
This installs the default Meta Project (metaproject.pprj) into the folder
{my protege instal}/examples/server
This file will have the starter instances which you can configure for your installation.
Let me know how you get on
Cheers
Neil
A quick thought...
Did you install the Server Component when you did the Essential Install?
This installs the default Meta Project (metaproject.pprj) into the folder
{my protege instal}/examples/server
This file will have the starter instances which you can configure for your installation.
Let me know how you get on
Cheers
Neil
- jonathan.carter
- Posts: 1087
- Joined: 04 Feb 2009, 15:44
After you moved the metaproject.prrj (and .pins and .pont) files, you need to update the Protege Server to look in that new location for the metaproject.
By default it looks in the {PROTEGE INSTALL}/examples/server folder, which is why we install our updated version to that location.
To update the Protege Server, you need to edit the 'run_protege_server.bat' (run_protege_server.sh on Mac, Linux and Unix) file and change the setting:
to
Jonathan
By default it looks in the {PROTEGE INSTALL}/examples/server folder, which is why we install our updated version to that location.
To update the Protege Server, you need to edit the 'run_protege_server.bat' (run_protege_server.sh on Mac, Linux and Unix) file and change the setting:
Code: Select all
METAPROJECT=examples/server/metaproject.pprj
Code: Select all
METAPROJECT={YOUR NEW FOLDER}/metaproject.pprj
Essential Project Team
Hello Jonathan,
I re-installed the Protege and EAM again in multi-user mode.
FYI, I installed the server components in Ubuntu (Linux).
As per the document, I pointed the METAPROJECT variable to the Essential metaproject.pprj folder. I also see your name 'Jonatathan Carter' instance in the class 'User'. However, I am not finding the instances EAM Annotation and Repository.
Please need your help to move forward. May be you can send the metaproject.* files to my email [email protected]
Thanks
Ramesh
I re-installed the Protege and EAM again in multi-user mode.
FYI, I installed the server components in Ubuntu (Linux).
As per the document, I pointed the METAPROJECT variable to the Essential metaproject.pprj folder. I also see your name 'Jonatathan Carter' instance in the class 'User'. However, I am not finding the instances EAM Annotation and Repository.
Please need your help to move forward. May be you can send the metaproject.* files to my email [email protected]
Thanks
Ramesh
- jonathan.carter
- Posts: 1087
- Joined: 04 Feb 2009, 15:44
Great.
Is everything working now?
Thanks
Jonathan
Is everything working now?
Thanks
Jonathan
Essential Project Team